| Av. Lázaro Cárdenas 3801 Col. Valle de Las Brisas CP 64790 Monterrey, México +52 (8) 357 77 79 mailto:mail@matel.com.mx |
Category Program
| Cat 1 | Voice and low speed data Cat 1 cable is intended for analog and digital and some low speed data applications. These cables meet the basic requirements defined by UL 444 and ICEA S-80-576. |
| Cat 2 | Data Cat 2 cable performance requirements are similar to those for type 3 cable (multipair communication cable) of the IBM Cabling System Technical Interface Specification (GA27-3773-1). Cat 2 cable is intended for voice and intermediate speed data applications up to and including 4 MBPS. |
| Cat 3 | Cat 3 data cable complies with the transmission requirements in the Electronic Industries Association/Telecommunication Industry Association (EIA/TIA) 568 Commercial Building Telecommunications Wiring Standard for Horizontal Unshielded Twisted-Pair (UTP) Cable and with the requirements for Category 3 cable in the EIA/TIA Technical Systems Bulletin TSB-36. It is intended for high speed LAN applications up to and including 16 MBPS. In addition to Cat 1 and 2 applications this cable can also be used for 10 Base T, OPEN DEConnect, 3-COM, PROTEON, 4 MBPS token ring and CHIPCOM systems. |
| Cat 4 | Cat 4 cable complies with the requirements in the proposed National Electrical Manufacturers Association (NEMA) Standard for Low-Loss Premises Telecommunications Cable. Cat 4 requirements are the same as Category 4 requirements of the Electronics Industy Association/Telecommunication Industry Association (EIA/TIA) Technical Systems Bulletin TSB-36. This cable is intended for high speed LAN applications up to and including 20 MBPS. |
| Cat 5 | Cat 5 cable complies with the requiremetns in the proposed National Electrical Manufacturers Association (NEMA) Standrd for Low-Loss Premises Telecommunications Cable. Cat 5 requirements are the same as Category 5 requirements for the Electonics Industry Association/Telecommunication Industry Association (EIA/TIA) Technical Systems Bulleitn TSB-36. This cable is intended for high speed LAN applications up to and including 100 MBPS. |